preloder

WASHING MACHINES FOR STERELIZATION OF KNIFE CARRIERS AND GLOVES TYPE MNN-10

Basic technical data:

TYPE: MNN 10

L = length:

1200 mm

B = width:

800 mm

H = height:

2200 mm

Weight

480 kg

Power supply voltage:

3 x 400 V

Total power:

10.5 kW

Water supply:

3/4 "

Discharge of water from the washer:

 2 "

Steam connection:

1 "DN25 / 2 bar / pair open

Ventilation chimney

200 mm

Application

Washing machine for knives and metal gloves Type: MNN-10 is a specialized device for the purpose of washing aprons and metal protective gloves and knife carriers used in meat industry partitioning departments with efficiency;

Metal gloves 20pcs / cycle up to 120 items / h

Standard knife carrier (4 knives + 2 steel) 10 pcs / cycle / up to 60 pcs / h

Loading

The loading of gloves or knife carriers into the machine is carried out by hand hanging on hangers adapted for this purpose. After hanging the gloves and knives carriers in the washing and rinsing chamber, and run the washing program.

The washing process in the main washing section takes place in a closed cycle with the addition of a washing and disinfecting agent that aids washing. The detergent is automatically dispensed by means of a pump with conductometric measurement directly to the main wash water tank. In addition, the water temperature during washing is automatically regulated and maintained. Accuracy, efficiency and cleaning performance are guaranteed by the use of cleaning rings with stainless steel nozzles and adequate water flow. The factor supporting the washing process is the mechanical rotation around its own axis. Additionally, the device has an eye-operated drawer filter that stops solid contamination. The overflow filter collects floating floating water in the tank, eliminating them directly into the drain in the floor.                 

The final rinsing process:

The final rinsing process is carried out using hot water from the hot or cold water network. The rinsing ring is equipped with stainless nozzles with adequate water flow and angle of rinsing. The use of warm water at 50-55 ° C supports the rinsing process and increases its effectiveness. 

Disinfection process:

The disinfection process takes place using the open steam from the factory network with a vacuum of 2 bar.

Construction:

The closed design ensures full safety of operators who are working during operation. Made of stainless steel ensures high hygienic conditions. In addition, the readable control panel allows full control of the washer's operator over the washing process. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum.

The most important advantages of the structure:

  • Single washer service.
  • Construction made of stainless steel - stainless steel.
  • Reduction of water consumption and cleaning agent to a minimum.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Basic washing section.
  • Final rinsing section with running water / recommended at 50-55 ° C /
  • Closed water circuits in the main wash zones.
  • Thermal disinfection.
  • Adjustable water used for rinsing.
  • Full regulation and control of the duration of the rinsing and disinfection washing process.
  • Functional design.
  • Operating panel DELTA.
CALL ME
+
Call me!
en_GB
pl_PL en_GB