Basic technical data:



L = length:

3000 mm

Washing and rinsing chamber

B = width:

640 mm

H = height:

1065 mm

Tank with pump and control

Embedded on the floor


580 kg

Power supply voltage:

3 x 400 V

Total power:

7.5 kW

Water supply:

3/4 "

Discharge of water from the washer:

 2 "

Steam connection:

3/4 "/ 3-6 bar /

Ventilation chimney

     2 x 200 mm



WASHING MACHINES FOR SLINGS FOR CHICKEN Type: MZK-15000S is a specialized device for the purpose of cleaning all types of slings used in the transport of post-mortem chicken with a capacity of up to 15,000 pcs / h in a closed cycle.       

Transport of slings:

The transport of slings in the washing process takes place automatically from the side of the main washing zone with the washing solution and the exit from the side of the rinsing zone with water, thanks to which it works in a line with a continuous transport system in a closed circuit. The washing speed is constant depending on the efficiency of the transport line.

The main washing process:

The main wash zone is divided into main washing and rinsing sections and water from the network. The washing process in the main washing section takes place in a closed cycle with the addition of a cleaning agent - a disinfectant that aids washing. The detergent is automatically dispensed by means of a pump with conductometric measurement directly to the main wash water tank. In addition, the water temperature during washing is automatically regulated and maintained. The accuracy, efficiency and performance of washing slings guarantees the use of nozzles with variable adjustable cleaning angle and adequate water flow. The factor supporting the process of thorough washing of the slings is the constant speed on the transport line. In addition, the device has a filtration system. The overflow filter collects floating floating water in the tank, eliminating them directly into the drain in the floor. The ring drawer filter keeps solid contaminants protecting the washing nozzles from clogging, which guarantees cleaning efficiency. The introduced water management in the washer ensures that the water in the main washing tank is properly refreshed.

The final rinsing process:

The final rinsing process is carried out using running water from the network. The rinsing ring is equipped with stainless steel nozzles with adequate water flow and rinsing angle. The water after rinsing the slurries flows into the common water management in the washer where it is divided appropriately and delivered to the water reservoir set on the floor in order to refresh it.


The closed design ensures full safety of operators who are working during operation. In addition, the use of a through-going structure allows the device to be located in the zone after unloading and the washed slings moved to the loading zone. Made of stainless steel ensures high hygienic conditions. In addition, the readable control panel allows full control of the washer's operator over the washing process. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum. The introduction of modern water management in a large sea limits the costs of using the washer in terms of water and energy consumption, cleaning agents, sewage discharge to the sewage system.

The most important advantages of the structure:

  • Operation of the device is maintenance-free.
  • Construction made of stainless steel - stainless steel.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Basic washing section.
  • Closed water circuits in the main wash zones.
  • Adjustable water used for rinsing.
  • Constant speed of the slaughter line.
  • Functional design.
  • Electronic control from the Delta desktop.
Call me!
pl_PL en_GB