Washing machine for smoke sticks TYPE MKW 600, OZ, AU

Basic technical data:


MKW 600, OZ, AU

Length 1760 mm
Width 1270 mm
Height 1465 mm
Weight 630 kg

Power supply voltage

3 x 400 V

Total power

1.5 kW

Water supply

1 "4-6 bar

Water drain from the washing machine

2 x 1, 5 "
Steam connection:

1” DN 25 /3-6 bar/

Closed circuit



The washing machine for smoke sticks, Type MKW.600.OZ,AU is a specialist machine designed for washing the smoke sticks, not longer than 100 cm and weighing up to 0,9 kg, used in all branches of meat processing, fish processing and food industry.

This washing machine is designed for fully automatic operation.

Loading unloading:

The washing machine is loaded manually by an operator at the front side of the machine, up to 600 pieces of sticks per one washing cycle.

The main washing process:

The MKW 600, OZ AU is programmed for two washing processes.

The main washing process with the addition of washing agent and the rinsing process.

The washing process in the main washing section takes place in a drum, rotating around its axis, creating a mechanical washing action by rotation of sticks. The system works as a closed circuit. The detergent is metered automatically into the tank containing water for main washing. When the main washing is finished, the water with a washing agent is drained through the automatic valve into the main tank. When the tank is fully emptied, the drain valve closes automatically and rinsing is started. The drum is filled with a running water from the water-pipe network and the rinsing starts. When the rinsing cycle is finished, the drain valve opens automatically to remove the rinsing water from the washing machine. The water from the rinsing process – quantity of about 10% (adjusted, depending on the needs related to washing water exchange in the tank) enters the main tank for reconditioning. The rest of the water is drained into the sewage system. After washing and rinsing a light signalling informs that the washing process is finished. Thanks to the described process this equipment is very economical in terms of consumption of washing agents and water.


The closed design ensures full safety of operators who are working during operation. Made of stainless steel ensures high hygienic conditions. In addition, the readable control panel allows full control of the washer operator over the washing and rinsing process. The mounted warning lights inform the operator of the washer about the washing processes. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum. The introduction of modern water management significantly reduces the costs of using the washer in terms of water and energy consumption, cleaning agents, sewage discharge to the sewage system.

The most important advantages of the structure:

The machine needs one operator.
Construction made of stainless steel
Water and washing agent consumption reduced to a minimum.
The main washing section with traffic lights informing about the washing process
Rinsing section with traffic lights informing about the rinsing process
Full adjustment and control of washing and rinsing process duration.
Functional design

Call me!
pl_PL en_GB