preloder

WASHING MACHINE FOR SALMON FILLET TYPE MFR-150S

Basic technical data:

Type

MFR-150S

Length

3200 mm

Width

900 mm

Height

1700 mm

Weight

720 kg

steel

Kwasoodporna 316 L / OOH17N14M2 /

Power supply voltage:

3 x 400 V

Total power:

8, 5 kW

Bringing the brine out of the washer:

2 "directly to the sewage system

Application

Washing machine for salmon fillet type MFR-150S is a specialized device for the purpose of washing with salt solution 3% salmon fillet used in fish processing plants with a capacity of 2800szt / h and weighing up to 1, 5 kg laying 2 pcs fillet on the tape.

The main washing process:

The loading of the fillet into the machine takes place manually from the side of the loading washing zone, thanks to which it can work in a line with a continuous transport system. After loading, the fillet on the work conveyor is moved automatically along the salt rinsing section of the fillet with the hydrochloric solution in a closed circuit at a pressure of 1-2 bar with 12 nozzles of stainless steel rinsing. Then, rinsing the salt in the main washing section takes place in an open circuit from the tank No. 2 with brine solution through another 12 stainless steel nozzles mounted on two rings at a pressure of 1-2 bar. Fresh brine through the drawer filter flows into tank No. 1 to refresh the solution. Taken from an auxiliary tank in which the 3% saline solution is replenished in an automatic or flooded manner. The final stage of salt rinsing is applying a solution of chlorine dioxide using spray nozzles obtained from the company's network.

After rinsing the salt from the fillet in an amount of up to 150 items / 1 transport trolley / device is stopped, the main tank is drained from the salt solution, rinsed with running water and then refilled with 3% saline solution from the auxiliary tank and the device is ready for work. The accuracy, efficiency and efficiency of rinsing the sole with fillet guarantees the use of stainless steel nozzles with variable adjustable angle of washing and adequate brine flow. The ring drawer filter collects solid contaminants protecting the washing nozzles against clogging, which guarantees the efficiency and reproducibility of salt rinsing. The working pressure on the flushing nozzles is adjustable in the range of 1-2 bar using bypass. The flow of brine and its quantity are regulated by means of mounted nozzles and the necessary throughput.               

Construction:

The closed design ensures full safety of operators who are working during operation. Made of acid resistant steel ensures high hygienic conditions and protects the device against corrosion. In addition, the readable control panel allows full control of the washer's operator over the washing process. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum.

The most important advantages of the structure:

  • Possibility of operation by two people or operator-free operation, in the processing line

  • Construction made of stainless steel

  • Basic wash section with a drawer filter

  • Closed washing cycle in the part of the washer and opened with clean solution aided with the current refreshing of the rinsing solution

  • Full regulation and control of the duration of the washing process

  • Adjustable pressure of the rinse solution using a bypass

  • Rinsing zone for chlorine dioxide

  • Functional design

  • Delta electronic control

CALL ME
+
Call me!
en_GB
pl_PL en_GB