preloder

WASHING MACHINE FOR EURO-PALLETS TYPE MEP 120S, FO

Basic technical data:

 Type:  MEP-120S, FO 

L = length:

5500 mm

B = width:

1530 mm with filter

H = height:

1870 mm

Weight 660 kg

Power supply voltage:

3 x 400 V

Total power:

 16, 5 kW

Water supply:

1 "

Compressed air connection

Ø8 mm 6-8 bar

Discharge of water from the washer:

 2 "

Steam connection:

1 "DN 25

Ventilation chimney

2 x 200 mm

 

Application

Washing machine for Europallets Type: MEP-120S, FO with a washing performance from 60-120sz./h in a vertical position is a specialized device for the purpose of washing a plastic Euro pallet 1200x800x160 used in all branches of the meat and food industry.

Euro pallet transport:

The loading of the Euro pallet into the machine takes place manually or automatically from the side of the main washing zone and unloading from the side of the rinsing zone, so that it can be aligned with the continuous transport system. After loading, the Euro-pallets to the loading section are moved automatically along the main washing section to the final rinsing section with running water from the network.

The main washing process:

The main wash zone is divided into main washing and final rinsing sections with running water. The washing process in the main washing section takes place in a closed cycle with the addition of a washing and disinfecting agent that aids washing. The detergent is automatically dispensed using the SLC conductivity cell pump directly into the main wash water tank. In addition, the water temperature during washing is automatically regulated and maintained. The accuracy, efficiency and efficiency of cleaning europallets guarantee the use of stainless steel nozzles with a constant angle and amount of water outflow. The factor supporting the process of thorough cleaning of europallets are guides and a mechanical conveyor for transporting europallets with smooth adjustment of the travel speed. In addition, the device has a filtration system. The overflow filter collects floating dirt in the tank, eliminating them directly to the floor drain. The self-cleaning slotted rotary filter selects solid contaminants above 0.5mm eliminating them outside the device, protecting the washing nozzles against clogging, which guarantees cleaning efficiency. The introduced water management in the washer ensures that the water in the main wash tank is properly refreshed and that the washing agent is used. Washed europallets go to the rinse section.

The final rinsing process:

The final rinsing process is carried out using hot or cold running water.

The rinsing ring is equipped with stainless steel nozzles with adequate water flow and angle of rinsing. The use of warm water at 50-55 ° C supports the rinsing process and increases its effectiveness. The water after rinsing the container flows into the common water management in the washer where it is properly divided and delivered to the water reservoir in the main washing zone for refreshing.

Construction:

The closed design ensures full safety of operators who are working during operation. In addition, the use of tunnel construction allows the device to be located in the dirty zone, washed europallets go directly to the clean zone. Made of stainless steel ensures high hygienic conditions. In addition, the readable control panel allows full control of the washer's operator over the washing process. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum. The introduction of modern water management significantly reduces the costs of using the washer in terms of water, energy, cleaning agents and sewage discharge to the sewage system.

The most important advantages of the structure:

  • It is possible to work fully unattended when loading automatically.
  • Construction made of stainless steel - stainless steel.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Main wash section with a self-cleaning slotted rotary filter.
  • Final rinsing section with running water from the network / recommended at 50-55 ° C /
  • Closed water circuits in the main wash zones.
  • Adjustable water used for rinsing.
  • Full regulation and control of the duration of the washing and rinsing process.
  • Functional design.
  • Control and programming from the electronic desktop DELTA touch screen with information about work or device failure.
  • The ability to connect a remote reading of work parameters.
  • Fixed counter with shift
CALL ME
+
Call me!
en_GB
pl_PL en_GB