Classic line Washing machine for transport containers Type. MP-300

Basic technical data:


L = length:

3800 mm

B = width:

800/1100 mm

H = height:

1700 mm


680 kg

Power supply voltage:

3 x 400 V

Total power:

38.5 kW

The power of electric heaters

30 kW

Water supply:

3/4 "

Discharge of water from the washer:

 2 "

Ventilation chimney

     2 x 200 mm



Main wash zone


Pump performance:

1x 40 m3/ h

Number of cleaning nozzles:

            40 pcs. Adjustable cleaning angle

Overflow filter

It collects excess water, fat, resulting foam       

Filter drawer eye

A mesh clearance of 2 mm

It eliminates permanent dirt

Tank capacity:

450 l

Water heating in the tank

Electric through heating elements

Transport containers

Adjustable automatic on the Delta desktop

Temperature regulation

Adjustable automatic on the Delta desktop

  Dosing chemical agent

With conductometric measurement


Rinsing zone



1 adjustable water flow

Number of rinsing nozzles:

6 x 2, 5l

Pressure at the entrance

4-6 bars from the heat network 50-55 ° C


For the water management system


Tunnel washer Type: MP-300 is a specialized device for the purpose of washing all kinds of plastic containers with dimensions of 600x400x200 used in all branches of the meat and food industry with a capacity of up to 300pcs / h.

Transport of containers:

Loading of containers into the machine takes place manually or automatically from the side of the main washing zone and unloading from the side of the rinsing zone, thanks to which it can be set in line with a continuous transport system. After loading the containers in the washing section, they are automatically moved along the main washing section to the final rinsing section with running water from the network.

The main washing process:

The main wash zone is divided into main washing and final rinsing sections with running water. The washing process in the main washing section takes place in a closed cycle with the addition of a cleaning agent to assist washing. The detergent is automatically dispensed by means of a pump with conductometric measurement directly to the main wash water tank. In addition, the water temperature during washing is automatically regulated and maintained. Accuracy, efficiency and cleaning performance of containers guarantee the use of stainless steel nozzles with variable adjustable cleaning angle and adequate water flow. The factor supporting the process of thorough washing of containers are guides and a mechanical conveyor for transporting containers with smooth regulation of the speed of movement. In addition, the device has a filtration system. The overflow filter collects floating floating water in the tank, eliminating them directly into the drain in the floor. The ring drawer filter collects solid contaminants protecting the washing nozzles against clogging, which guarantees the effectiveness of cleaning. The introduced water management in the washer ensures that the water in the main washing tank is properly refreshed. The washed containers are sent to the final rinsing section.

The final rinsing process:

The final rinsing process is carried out using hot water from the mains, hot or cold water. The rinsing ring is equipped with stainless nozzles with a suitable water flow and angle of rinsing. The use of warm water at 50-55 ° C supports the rinsing process and increases its effectiveness. Water after rinsing the container flows into the common water management in the washer where it is properly divided and delivered to the water reservoir in the main washing zone, in order to refresh it.


The closed design ensures full safety of operators who are working during operation. In addition, the use of the tunnel construction allows the device to be located in the dirty zone and the washed containers go directly to the clean zone. Made of stainless steel ensures high hygienic conditions. In addition, the readable control panel allows full control of the washer's operator over the washing process. In our devices we use proven components from renowned companies and modern solutions aimed at reducing the maintenance costs of our devices to a minimum. The introduction of modern water management significantly reduces the costs of using the washer in terms of water and energy consumption, cleaning agents, sewage discharge to the sewage system.

The most important advantages of the structure:

  • Possibility of working for two people.
  • Construction made of stainless steel - stainless steel.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Reducing the consumption of water and detergent to a minimum by introducing proper water management in the washer.
  • Basic washing section.
  • Final rinsing section with running water / recommended at 50-55 ° C /
  • Closed water circuits in the main wash zones.
  • Adjustable water used for rinsing.
  • Full regulation and control of the duration of the washing and rinsing process.
  • Functional design.
  • Analog control.
Call me!
pl_PL en_GB